SECTION 02 / CS-19

Internal dimensions

Read length, width and height as a sourced record, then verify the actual unit.

Open dimension screen →Ask about measurements

Illustrative context · verify the actual unit

S-02 / INSIDE BOX

Read each axis independently.

Inside length

Floor-level usable longitudinal record; obstacles and actual condition still need checking.

Inside width

Clear transverse record between relevant surfaces, not the nominal external width.

Inside height

Clear vertical record at the relevant location, separate from the door height.

DATED REFERENCE EXAMPLES

Three profiles, one strict warning.

20’ STD5,900 × 2,352 × 2,393 mm

40’ STD12,034 × 2,352 × 2,395 mm

40’ HC12,034 × 2,352 × 2,700 mm

CMA CGM catalogue examples reviewed 6 September 2026. Nominally similar units and serial series can differ; record the actual unit and clear opening before relying on a screen.

NEXT SECTION

Carry the source and every open gate into the local screen.

A listed passing orientation remains a geometry pre-check only.

Open dimension screen →